This role is used to modify kernel settings. For example, on Linux, settings in /proc/sys (using sysctl), /sys/fs, and some other settings. It uses tuned for its default provider on Enterprise Linux and derivatives (RHEL and CentOS) and Fedora.

• tuned homepage - https://github.com/redhat-performance/tuned

Requirements

See below

Collection requirements

If you want to manage rpm-ostree systems with this role, you will need to install additional collections. Please run the following command line to install the collection.

ansible-galaxy collection install -vv -r meta/collection-requirements.yml

Role Variables

The values for some of the various kernel_settings_GROUP parameters are a list of dict objects. Each dict has the following keys:

• name - Usually Required - The name the setting, or the name of a file under /sys for the sysfs group. name is omitted when using replaced.
• value - Usually Required - The value for the setting. value is omitted when using state or previous. Values must not be YAML bool type. One situation where this might be a problem is using value: on or other YAML bool typed value. You must quote these values, or otherwise pass them as a value of str type e.g. value: "on".
• state - Optional - the value absent means to remove a setting with name name from a group - name must be provided
• previous - Optional - the only value is replaced - this is used to specify that the previous values in a group should be replaced with the given values.

kernel_settings_sysctl

A list of settings to be applied using sysctl. The settings are given in the format described above. Note that the settings are additive - by default, each setting is added to the existing settings, or replaces the setting of the same name if it already exists. If you want to remove a specific setting, use state: absent instead of giving a value. If you want to remove all of the existing sysctl settings and replace them with the given settings, specify previous: replaced as one of the values in the list. If you want to remove all of the sysctl settings, use the dict value {"state": "empty"}, instead of a list, as the only value for the parameter. See below for examples.

kernel_settings_sysfs

A list of settings to be applied to /sys. The settings are given in the format described above. Note that the settings are additive - by default, each setting is added to the existing settings, or replaces the setting of the same name if it already exists. If you want to remove a specific setting, use state: absent instead of giving a value. If you want to remove all of the existing sysfs settings and replace them with the given settings, specify previous: replaced as one of the values in the list. If you want to remove all of the sysfs settings, use the dict value {"state": "empty"}, instead of a list, as the only value for the parameter. See below for examples.

kernel_settings_systemd_cpu_affinity

To set the value, specify a string in the format specified by https://www.freedesktop.org/software/systemd/man/systemd-system.conf.html#CPUAffinity= If you want to remove the setting, use the dict value {"state": "absent"}, instead of a string, as the value for the parameter.

kernel_settings_transparent_hugepages

To set the value, specify one of the following string values: always madvise never. This is the memory subsystem transparent hugepages value. If you want to remove the setting, use the dict value {"state": "absent"}, instead of a string, as the value for the parameter.

kernel_settings_transparent_hugepages_defrag

To set the value, specify one of the following string values: always defer defer+madvise madvise never. This is the memory subsystem transparent hugepages fragmentation handling value. The actual supported values may be different depending on your OS. If you want to remove the setting, use the dict value {"state": "absent"}, instead of a string, as the value for the parameter.

kernel_settings_purge

default false - If true, then the existing configuration will be completely wiped out and replaced with your given kernel_settings_GROUP settings.

kernel_settings_reboot_ok

default false - If true, then if the role detects that something was changed that requires a reboot to take effect, the role will reboot the managed host. If false, it is up to you to determine when to reboot the managed host. The role will return the variable kernel_settings_reboot_required (see below) with a value of true to indicate that some change has occurred which needs a reboot to take effect.

Variables Exported by the Role

The role will export the following variables:

kernel_settings_reboot_required - default false - if true, this means a change has occurred which will require rebooting the managed host in order to take effect. If you want the role to reboot the managed host, set kernel_settings_reboot_ok: true, otherwise, you will need to handle rebooting the machine.

Examples of Settings Usage

kernel_settings_sysctl:
  - name: fs.epoll.max_user_watches
    value: 785592
  - name: fs.file-max
    value: 379724
kernel_settings_sysfs:
  - name: /sys/kernel/debug/x86/pti_enabled
    value: 0
  - name: /sys/kernel/debug/x86/retp_enabled
    value: 0
  - name: /sys/kernel/debug/x86/ibrs_enabled
    value: 0
kernel_settings_systemd_cpu_affinity: "1,3,5,7"
kernel_settings_transparent_hugepages: madvise
kernel_settings_transparent_hugepages_defrag: defer

NOTE that the list valued settings are additive. That is, they are applied in addition to any current settings. For example, if you already had

kernel_settings_sysctl:
  - name: kernel.threads-max
    value: 29968
  - name: vm.max_map_count
    value: 65530

then after applying the above, you would have

kernel_settings_sysctl:
  - name: kernel.threads-max
    value: 29968
  - name: vm.max_map_count
    value: 65530
  - name: fs.epoll.max_user_watches
    value: 785592
  - name: fs.file-max
    value: 379724

This allows multiple higher level roles or playbooks to use this role to provide the kernel settings specific to that component. For example, if you are installing a web server and a database server on the same machine, and they both require setting kernel parameters, the kernel_settings role allows you to set them both.

If you specify multiple settings with the same name in a section, the last one will be used.

If you want to replace all of the settings in a section with your supplied values, use previous: replaced as a single, preferably first element in the list of settings. This indicates that the previous settings in the system should be replaced with the given settings. For example:

kernel_settings_sysctl:
  - previous: replaced
  - name: kernel.threads-max
    value: 30000
  - name: vm.max_map_count
    value: 50000

This will have the effect of removing all of the existing settings for kernel_settings_sysctl, and adding the specified settings. If you want to remove a single setting, specify state: absent in the individual setting, instead of a value:

kernel_settings_sysctl:
  - name: kernel.threads-max
    value: 30000
  - name: vm.max_map_count
    state: absent

This will remove the vm.max_map_count setting from the kernel_settings_sysctl settings. If you want to remove all of the settings from a group, specify state: empty as a dict instead of a list:

kernel_settings_sysctl:
  state: empty

This will have the effect of removing all of the kernel_settings_sysctl settings.

Use {"state":"absent"} to remove a scalar valued parameter. For example, to remove all of kernel_settings_systemd_cpu_affinity, kernel_settings_transparent_hugepages, and kernel_settings_transparent_hugepages_defrag settings, use this:

kernel_settings_systemd_cpu_affinity:
  state: absent
kernel_settings_transparent_hugepages:
  state: absent
kernel_settings_transparent_hugepages_defrag:
  state: absent

Example Playbook

- name: Manage kernel settings
  hosts: all
  vars:
    kernel_settings_sysctl:
      - name: fs.epoll.max_user_watches
        value: 785592
      - name: fs.file-max
        value: 379724
      - name: kernel.threads-max
        state: absent
    kernel_settings_sysfs:
      - name: /sys/kernel/debug/x86/pti_enabled
        value: 0
      - name: /sys/kernel/debug/x86/retp_enabled
        value: 0
      - name: /sys/kernel/debug/x86/ibrs_enabled
        value: 0
    kernel_settings_systemd_cpu_affinity: "1,3,5,7"
    kernel_settings_transparent_hugepages: madvise
    kernel_settings_transparent_hugepages_defrag: defer
  roles:
    - linux-system-roles.kernel_settings

Warnings

The kernel_settings role will cause other sysctl settings to be applied when using the tuned implementation, which is the default. This can happen when you manually edit /etc/sysctl.d/ files, or if the sysctl.d files are installed by some system package. For example, on Fedora, installing the libreswan package provides /etc/sysctl.d/50-libreswan.conf. Using the kernel_settings role will cause this file to be reloaded and reapplied. If this behavior is not desired, you will need to edit the tuned configuration on the managed hosts in /etc/tuned/tuned-main.conf and set reapply_sysctl=0.

The settings you apply with the kernel_settings role may conflict with other settings. For example, if you manually run the sysctl command, or manually edit /etc/sysctl.d/ files, or if the sysctl.d files are installed by some system package, they may set the same values you are setting with the kernel_settings role. For sysctl settings, the precedence goes like this:

• sysctl files have highest precedence - /etc/sysctl.conf and /etc/sysctl.d/* will override everything
• kernel_settings role settings have the next highest precedence
• settings set manually using the sysctl command have the lowest precedence

For all other settings such as sysfs, the settings from kernel_settings role have the highest precedence.

rpm-ostree

See README-ostree.md

License

Some parts related to tuned are GPLv2+. These are noted in the headers of the files. Everything else is MIT, except where noted. See the file LICENSE for more information.

Author Information

Rich Megginson (richm on github, rmeggins at my company)